Website Last Updated: 03 July 2025 at 04:09pm
REF: 4789 | Unknown
Used Angled Head for CNC Machine, O.M.G TAV20 compound angle head with coolant compatible...
REF: 4338 | Unknown
Used BMT55 Angular Driven Tool Holder for CNC Lathes, BMT55, ER25 Collet chuck, Length...
REF: 4743 | Unknown
Used Tombstone for CNC Horizontal Machining Centres. Suitable for pallets of 500mm....
REF: 4334 | Unknown
Used BMT55 Angular Driven Tool Holder for CNC Lathes, BMT55, ER25 collet holder,...
REF: 4335 | Unknown
Used BMT55 Angular Driven Tool Holder for CNC Lathes, BMT55, ER25 Collet Holder,...
REF: 4336 | Unknown
Used BMT55 Angular Driven Tool Holder for CNC Lathes, BMT55, ER25 Collet Holder,...
REF: 4741 | Unknown
Used Tombstone for CNC Horizontal Machining Centres. Suitable for pallets of 500mm....
REF: 9186 | Unknown
Used BMT55 Angular Driven Tool Holder for CNC Lathes, ER25 Collet holder, Length...
REF: 4736 | Unknown
Used Tombstone for CNC Horizontal Machining Centres. Suitable for pallets of 500mm....
REF: 8723 | Unknown
Used Double Ended Axial Driven Tool Holder for CNC Lathes, ER32, To suit Kia SKT250MS...
REF: 9188 | Unknown
Used BMT55 Angular Driven Tool Holder for CNC Lathes, BMT55, ER25 Collet Chuck, Length...
REF: 8725 | Unknown
Used Double Ended Axial Driven Tool Holder for CNC Lathes, ER32, To suit Kia SKT250MS...
REF: 4742 | Unknown
Used Tombstone for CNC Horizontal Machining Centres. Suitable for pallets of 500mm....
REF: 4735 | Unknown
Used Tombstone for CNC Horizontal Machining Centres. Suitable for pallets of 500mm....
REF: 4337 | Unknown
Used BMT55 Angular Driven Tool Holder for CNC Lathes, BMT55, ER25 Collet holder,...
REF: 4682 | Unknown
Drilling Attachment, 40mm bore, to suit VL/SLX/RLX425 CNC Lathe, (Unused)
REF: 4738 | Unknown
Used Tombstone for CNC Horizontal Machining Centres. Suitable for pallets of 500mm....
REF: 8765 | Unknown
Used BMT55 Straight Driven tool Holder for CNC Lathes, ER20, length of drive to end...
REF: 4339 | Unknown
Used BMT55 Straight Driven tool Holder for CNC Lathes, ER25, length of drive to end...
REF: 8759 | Unknown
Used BMT55 Angular Driven Tool Holder for CNC Lathes, tapping head, Length of drive...
REF: 3237 | Unknown
Granite Table, 3ft x 4ft on stand. For general use, not calibrated
REF: 8718 | Unknown
Used Axial Driven Tool Holder for CNC Lathes, VDI40, ER32 collet chuck, s/n 59-0085,...
REF: 3308 | Unknown
Granite Surface table mounted on a cabinet. 600 x 1,200 x 200mm thick
REF: 4641 | Unknown
Used 5C Collet chuck to suit SLX/RLX425, D1-8 camlock fitting. (Incomplete, rear...
REF: 8770 | Unknown
Used BMT55 Straight Driven tool Holder for CNC Lathes, NTZ1511, Tapping head, length...
REF: 4612 | Unknown
Used Machine Vice, 160mm jaw width, 170mm jaw opening, Overall size 390 x 160 x 120mm high
REF: 4388 | Unknown
Machine Vice, Overall length 510mm, Overall width 150mm, Overall height 110mm, Jaw...
REF: 4385 | Unknown
Machine Vice, Overall lengh 570mm, Overall width 150mm, Overall height 110mm, Jaw...
REF: 4382 | Unknown
Edge Clamps, pull down type, serrated edges, 75mm wide, 100mm tall, Spring loaded. 4 off.
REF: 4080 | Unknown
Granite Inspection Block, 300 x 300 x 300mm
REF: 4600 | Unknown
Used Angle Plate 270 x 150 x 160mm
REF: 3977 | Unknown
Multibore collets, Type J. Ranging from 60 to 80MM
REF: 4708 | Unknown
Used Shrink Fit Tool Holders, various sizes and lengths, BT40 and CAT40 (sizes upon...