Website Last Updated: 21 February 2019 at 12:36pm
£450
Doosan Axial Driven Tool Holder, to suit Doosan Puma 2000M or similar Doosan, ER25 collet, Eppinger Preci-flex,, s/n409939-R1, ref no. 7.071.940, 1:1 ratio, max 6,000rpm. Bearing needs replacing
For more information on this product please call one of our experts on: +44 (0)1444 245414 and quote the four digit product reference code.
REF: 9028 | Tornos | 2014
Tornos Robobar SBF326e mag bar feed, 2014, s/n 3538-14/10, 4 metre bars, off Tornos CT20
REF: 9516 | X-Tract | 2004
X-Tract Bar Unloader, s/n 5097, 2004, (was fitted to Doosan Puma 2500 lathe)
REF: 9563 | Haas | 1997
Haas VF2, 1997, s/n9365, c/w HRT160 4th axis, table 914 x 356mm, trav 762 x 406 x 508mm, 20atc, bt40, 7500rpm, 11kw.
REF: 9563 | Haas | 1996
Haas VF0, 1996, s/n 7463, table 660 x 356mm, trav 508 x 406 x 508mm, bt40, 20atc, 7500rpm, 5.6kw.
REF: 9523 | Stankoimport
Stankoimport 1M636T 700 x 3,000mm Straight Bed Centre Lathe, 700mm dia swing, 3000mm between centre, Spindle bore 48mm, rapid traverse, 10 Rpm to 1250...
REF: 9544 | Lilian
Lilian Turret Milling Machine, Vari speed spindle, Power feed, Coolant Pump, Mitutoyo Dro, Low volt light,
REF: 9541 | Vertex
Vertex Posilok Collet Set: Includes (1/4,3/8,1/2 & 5/8″) Ø collets
REF: 9540
Grippex Bar Puller 40 VDI : Work on 1½ bar coolant pressure to close fingers, Normally operated via “M” function on CNC controller to open/close fingers....
REF: 9539 | Hermle | 2000
Hermle C800U 5 axis VMC, 2000, Ser No 13740, Heidenhain TNC430, Traveres 800 x 600 x 500mm, B axis360 x 0.001 degree, Caxis -20 to +90 degrees, 10.5kw,...
REF: 9538 | LNS
LNS Quick load Servo Bar Feeder, 1998, s/n 150831-98, 6-120mm bar cap, accepts 1.6m bar (was fitted to a Gildemeister CTX 410)
REF: 9537 | Renishaw
Renishaw M18 TS27R Probe: Interference resistant hard-wired communication, 1.00 μm 2σ repeatability. Broken tool detection Compact 3D touch-trigger tool...
REF: 9548 | Spinner | 1997
Spinner SB-CNC, 1997, Siemens 840D, Driven tooling, 12 station turret, 5,000rpm, 42mm bar capacity, Travel X250mm, Z 285mm, VDI16 tooling, No tailstock,...
REF: 9521 | Unknown
Corner cutter, 3 Phase, Angular adjustment on Quill of 90 degrees, Angular rotation of 360 Deggrees. Possibly fit Hermle, Mikron and Maho
REF: 9520 | Unknown
Arbor, Horizontal Milling machine attachment Dove tail width 80mm, Pitch of attachment holes 145 x 110mm, length of arbor 210mm, CAT 40 taper. Possibily...
REF: 9527 | Doosan
Doosan VTL1620M tool holder, Long turning type, horizontally mounted.