Website Last Updated: 02 May 2024 at 03:05pm
(4179) Used Tombstone for CNC Horizontal Machining Centres
Call for Price
- Location: Burgess Hill
Description
Used Tombstone for CNC Horizontal Machining Centres. Various. We have a good selection of tombstones suitable for 500mm sized horizontal machining centres, both steel and cast iron, plates and cubes. Please call for details. Chick vices shown are not included.
For more information on this product please call one of our experts on: +44 (0)1444 245414 and quote the four digit product reference code.
- Used Tombstone for CNC Horizontal Machining Centres
- Used Tombstone for CNC Horizontal Machining Centres
- Used Tombstone for CNC Horizontal Machining Centres
- Used Tombstone for CNC Horizontal Machining Centres
- Used Tombstone for CNC Horizontal Machining Centres
- Used Tombstone for CNC Horizontal Machining Centres
- Used Tombstone for CNC Horizontal Machining Centres
- Used Tombstone for CNC Horizontal Machining Centres
- Used Tombstone for CNC Horizontal Machining Centres
- Used Tombstone for CNC Horizontal Machining Centres
Featured Stock
Used Karcher HDS-745M ECO Medium Class High-Pressure Cleaner
Call for Price
REF: 4356 | Karcher
Used Karcher HDS-745M ECO Medium Class High-Pressure Cleaner, 100 bar @ 12 litres/min hot/cold, 35 bar steam @5.8l/min, 150 degrees C, 16 amp single phase...
Used Colchester Chipmaster
Call for Price
REF: 4661 | Colchester | 1977
Used Colchester Chipmaster, 1977, s/n FCG7011, variable spindle speed, 35-3000rpm, height of centres 143mm, distance between centres 510mm, swing over...
Used XYZ ProTURN SLX555 x 1.75M CNC Lathe
Call for Price
REF: 4076 | XYZ | 2011
Used XYZ ProTURN SLX555 x 1.75M CNC Lathe, 2011, s/n 7983, 315mm 3 jaw chuck, qctp & holders, tailstock, centres 1750mm, swing over bed 560mm, in...
Used XYZ ProTURN SLX425 X 2M Lathe
Call for Price
REF: 4371 | XYZ | 2013
Used XYZ ProTURN SLX425 X 2M Lathe, 2013, s/n BL100, Prototrak Control, Spindle Speed 25-2500 rpm, Swing 480mm, Swing in gap 700mm, Gap in front of faceplate...
Used XYZ Machine A-Type 6″ Machine Vice
Call for Price
REF: 4452 | XYZ
Used XYZ Machine A-Type 6″ Machine Vice, 250mm opening
MEP SHARK 320AX Automatic Horizontal Bandsaw
Call for Price
REF: 4449 | MEP | 2002
MEP SHARK 320AX Automatic Horizontal Bandsaw, 2002, s/n162653/2/N, cutting dimensions round 90 degrees – 260mm, Cutting dimensions square at 90 degrees...
HSM V-Press 610
Call for Price
REF: 4275 | HSM | 2018
HSM V-Press 610, 2018, s/n 570000767, Machine no. 6110.154, pressing power 12 tons (120kn), Bail weight up to 11kg, bale size – 800mm long, 600mm...
BMT55 Angular Driven Tool Holder
Call for Price
REF: 8759 | Unknown
BMT55 Angular Driven Tool Holder, tapping head, Length of drive to the end of the tang – 108mm, (To suit Nakamura lathe)
Used Mori Seiki NT4250DCG x 1,500 5 Axis Turn/Mill CNC Turning Centre
Call for Price
REF: 4405 | Mori Seiki | 2015
Used Mori Seiki NT4250DCG x 1,500 5 Axis Turn/Mill CNC Turning Centre, 2015, s/n NT425150901, Fanuc 31iA5 Control, Kitagawa B21 & B15 Chucks, Max....
Used YCM NSV102A CNC Vertical Machining Centre
Call for Price
REF: 4440 | YCM | 2007
Used YCM NSV102A CNC Vertical Machining Centre, 2007, s/n 0088, Heidenhain TNC530 Control, Nikken 4th Axis with Chuck & Tailstock, Through Spindle...
Edge Clamps
Call for Price
REF: 4382 | Unknown
Edge Clamps, pull down type, serrated edges, 75mm wide, 100mm tall, Spring loaded. 4 off.
BMT55 Angular Driven Tool Holder
Call for Price
REF: 8760 | Eppinger
BMT55 Angular Driven Tool Holder, Eppinger, s/n296625-6, model no. R78685, 1:1 ratio, max 6,000rpm Length of drive to Tang – 103mm, (To fit Doosan...
BMT55 Angular Driven Tool Holder
Call for Price
REF: 4389 | Eppinger
BMT55 Angular Driven Tool Holder, Eppinger preci-flex, Length of drive to the end of the tang – 103mm
BMT55 Straight Driven tool Holder
Call for Price
REF: 8765 | Unknown
BMT55 Straight Driven tool Holder, ER20, length of drive to end the tang – 108mm
BMT55 Straight Driven tool Holder
Call for Price
REF: 8770 | Unknown
BMT55 Straight Driven tool Holder, NTZ1511, Tapping head, length of drive to end the tang – 107mm, (To suit Nakamura lathe)