(9255) Zoller Venturion 450 Pilot 3 Semi Automatic Tool Setter

Mikron XSM 600U 5 Axis Ultra Fast Machining Centre

£99,950

REF: 9517 | Mikron | 2006

Mikron XSM 600U, 2006, 5 Axis Ultra Fast Machining Centre, Heidenhain iTNC 530DP Control, X” 600mm,”Y” 450mm,”Z” 450mm,”B”...

Colchester Multiturn 1000

£14,950

REF: 9476 | Colchester | 2004

Colchester Multiturn 1000,2004, s/n N90012, Fanuc 0iTB Control, 3 jaw chuck, 8 stn turret, swing over bed 350mm, in gap 535mm, centres 650mm, spindle bore...

Mazak Slant Turn 50N

£44,950

REF: 9513 | Mazak | 1998

Mazak Slant Turn 50N, 1998, s/n 187875, Mazatrol T Plus Control, 500mm powered chuck, 15 stn turret, toolsetter, swarf conveyor. Note No Tailstock,660mm...

Colchester Triumph 2500VS x 1250mm Gap Bed Lathe

£10,950

REF: 9464 | Colchester | 1995

...

Bridgeport VMC500/16

£12,950

REF: 9313 | Bridgeport | 1997

Bridgeport VMC500/16, 1997, s/n 720153, Heidenhain 370,table 840 x 360mm, trav 500 x 340 x 520mm, 7000rpm, 16atc, bt40, 5.5/7.5kw

Daewoo Puma 200MC

£12,950

REF: 9477 | Daewoo | 1998

Daewoo Puma 200MC, 1998, s/n20ms0128, Fanuc 18T Control, driven tooling, C axis, NO TAILSTOCK, turning dia 300mm x 513mm length, 65mm bar cap. 200mm power...

Miyano BNJ51SY3 Twin Turret, Sub Spindle,Y axis Turning Centre

REF: 9448 | Miyano | 2010

Miyano BNJ51SY3 Twin Turret, Sub Spindle,Y axis Turning Centre, 2010, s/n CJ5Y0063, Fanuc OiT D Control, Twin Turret, Sub Spindle,Y axis, 12 stn Driven...

XYZ XL 730 x 1 metre

Call for Price

REF: 9496 | XYZ | 2014

XYZ XL 730 x 1 metre, 2014, Unused from New, S/No. NC-B-3-0630, Siemens 828D CNC Control, 730mm Swing Over Bed, 610 Over Cross Slide, 1m between Centres,...

Colchester Mascot 1600 x 60″ Gap Bed Lathe

£5,950

REF: 9480 | Colchester | 1978

Colchester Mascot 1600 x 60″ Gap Bed Lathe,1978, s/n 7/0211/12963, dro, 3 & 4 Jaw Chucks, Large Faceplate, 3 pt Steady, Qctp

Unused Crawford CDC54/60 collet chuck

£900

REF: 8197 | Crawford

Unused Crawford CDC54/60 collet chuck, A2-6 mount

Crawford CDC42 collet chuck

£850

REF: 8082 | Crawford

Crawford CDC42 collet chuck, A2-5 mount – UNUSED

Pratt Burnerd 3 jaw manual chuck

£250

REF: 9067 | Pratt Burnerd

Pratt Burnerd 3 jaw manual chuck, 310mm dia, plain back, s/n H44855. set of hard outside jaws

Granite table 1,000 x 1000mm

£850

REF: 9456 | Unknown

Granite table 1,000 x 1000mm, on stand

Mitutoyo Euro-C Apex series 544 CMM

Call for Price

REF: 9454 | Mitutoyo

Mitutoyo Euro-C Apex series 544 CMM, Travel X-544, Y-505, Z-405mm, Linear scales, 0.0005mm resolution, Max workpiece height 545mm, weight 100kgs, Table...

Mitutoyo Linear 600 Height Gauge

Call for Price

REF: 9455 | Mitutoyo

Mitutoyo Linear 600 Height Gauge, s/n 5501

DMG 103V CNC Vertical Machining centre

Call for Price

REF: 9470 | DMG | 1999

DMG 103V, 1999, s/n 28860004722, Heidenhain 426 control, Travels 1,020 x 540 x 540mm, 20 stn ATC, CAT 40 tooling, 12,000 RPM, program run time 13,486