.JPG) |
(6136) Mazak Integrex E650H-2 x 2000mm |
£0.00 |
| 2007, s/n188120, Mazatrol Matrix Control, max machining dia 920mm, spindle through hole dia 170mm, 80atc, Capto C8 Tooling, 24" Kitigawa Thru Hole Chuck, 70kg high pressure coolant, swarf measurement system. Power on 11,844 Hours, Auto Op 5,085 Hrs, Auto Cut 4,165 Hrs, Total Cut 3,393 Hrs. To view video http://www.youtube.com/watch?v=dGP9EdaLPlc |
|
  |
|
 |
(5340) Hyundai HIT30F |
£26,000.00 |
| 1998(Installed 2000), s/n34278004, Fanuc 0T with graphics option, 12” chuck, 8 stn 16 position turret, toolsetter, programmable tailstock, swarf conveyor & bin, 320mm turning dia,1000mm turning length, 80mm bar cap, 30-3000rpm, 22kw |
|
  |
|
 |
(5323) Nakamura TW20MMYY |
£59,950.00 |
| Dec 1994, s/n w201610, Fanuc 16TTA NT-Nurse usersoftware and Luck-Bei convers. prog. Barcap. 64 mm, 2x y-axis +/- 40 mm, Spindle 11/15 kW, max. 4.500 rpm, 2x 12 station turrets, all stations for driven tools, 2x full c-axis, 2x aut. toolsetter, Partscatcher right side Interface for barfeeder, Swarf conveyor, 2x 3-jawchucks 215mm, Toolholders: 2 x straight driven tools, 3x angle driven tools, straight approx. 15 borigholders approx. 15 OD holders 1x cut off holder |
|
|
|
 |
(6021) Colchester Combi 6000 Electronic Centre Lathe |
£39,950.00 |
| 2006, s/n E60014, Fanuc 210iTA Control, 3 jaw chuck, 8 station VDI50 turret, fixed steady, swing over bed 800mm, distance between centres 3,000mm, spindle bore 120mm, 22/26kw, programmable spindle speeds 15-1500rpm |
|
|
|
 |
(5954) WFL M40G/2000 Mill Turn Centre |
£380,000.00 |
| 2006, s/n34104101, Siemens 840D, Prog steady, 2 opposed spindles (counter spindles) & bottom slide, universal milling spindle & 50atc, spindle nose HSK-A63, centre distance 2000mm, swing over bed/cross slide 520mm, long travel z 2150mm, cross travel 600mm, long travel (spindle R) 1777mm, each spindle fitted with 315mm 3 jaw chuck, spindle bore 77mm, spindle power 100%/40% 29/33kw, max speed 4000 Min-1. To view video http://www.youtube.com/watch?v=kjsw2nt1dm0 |
|
|
|
|
|
 |
(5061) Mori Seiki Partner L100V Vertical Turning Lathe |
£9,950.00 |
| 1991, s/n990, Fanuc 0M Control, V-HL2 Robot Loader, max turning dia 100mm, max turning length 80mm, 4000rpm, gang type turret - no of tools 4 station x 4 = 16, chuck 150mm., 5.5/3.7kw
|
|
|
|
|
|
 |
(6229) Haas TL1 CNC/Manual Toolroom Lathe |
£16,950.00 |
| 2007, s/n3080255, 3 jaw 203mm chuck, swing over front apron 406mm,swing over cross slide 216mm, spindle bore 59mm, 1800rpm, 7.5hp, Dorian toolpost & 3 holders |
|
|
|
 |
(6145) Mazak Integrex 200-IISY |
£115,000.00 |
| 2002, s/n 161978, Mazatrol PC Fusion 640M Control, Hydrafeed ML1 short mag bar feed, 250mm big bore chuck 65mm bar cap, 200mm chuck on sub spindle, 40 tool capto tool changer, automatic parts catcher, swarf management system, 70 bar thru spindle coolant, Renishaw work probing & upgraded Renishaw tool measuring, gear hobbing option, full C axis sub spindle, EIA/ISO option, mill spindle synchronised tapping, auto pecking cycle with load detection |
|
|
|
 |
(6151) Harrison Alpha 400 |
£0.00 |
| 1996, s/n A30357, Fanuc Control, 195mm centre height, 1,250 between centres, 2,500rpm, 3 & 4 jaw chucks |
|
|
|
.jpg) |
(6146) Gildemeister DMG MF Twin 65 Y Axis |
£0.00 |
| 1998, s/n 407388, Siemens 840C Control, hydraulic 3 pt steady, renishaw probe interface, IFM fume extraction, swarf conveyor, solid spindle, 2 x 12 stn turret all driven, top turret y axis, main & sub spindle full C axis, max distance between spindles 800mm, slide travel X1 & X2 190mm, Z1 & Z2 555mm, slide travel Y1 ±40mm, long travel spindle 2 600mm, main drive 21kw, 5000rpm, sub spindle drive 14kw 6300rpm |
|
|
|
 |
(5625) Mori Seiki MT 253 Opposed Spindle Mill-Turn Centre |
£119,950.00 |
| 2000 (Installed mid 2001),MSG 5021 Control with mapps software, main spindle 10" chuck, sub spindle 8" chuck, 42atc, capto tooling, b axis, high pressure coolant, main motor spindle 1 22/15kw, spindle 2 15/11kw, turning diameter 570mm, turning length 1530mm, spindle bore 86mm. Cutting Hours 2733. 56 pieces of Capto tooling |
|
|
|
 |
(5753) Hitachi TS15 |
£0.00 |
| Fanuc 21t, 2000, Ser No 15386, 12 stn turret, 6” Chuck, Collet Chuck & 18 Collets, Toolsetter, Parts Catcher, Hydrafeed ML1 Short Mag Bar Feed, turning dia 165mm, turning length 300mm, 45mm bar cap, 6000rpm |
|
|
|
 |
(6177) CMZ TC30-1350 |
£0.00 |
| 2010, s/n 00175, Fanuc 32i Control with Manual Guide, 315mm chuck, 550mm turning dia x 1350mm turning length, 77mm bar cap, 42/27kw, 12 stn turret, Renishaw toolsetter, tailstock, swarf conveyor. 502 hours |
|
|
|
 |
(6065) Mazak Integrex 50Y Mill Turn Centre x 1500 |
£90,000.00 |
| 1998, s/n 133698, Mazatrol T Plus Control, Forkhardt 480mm chuck, 60atc, toolsetter, high pressure coolant with through milling spindle delivery, swarf conveyor, tailstock, max machining dia 710mm, max machining length 1537mm, 22/30 kw, bar cap 68mm. Control options EIA/ISO, 512kb memory, 2nd aux function, y axis control, synchro mill tapping, user macro, enhanced y axis Mazatrol |
|
|
|
|
.JPG&pic1=6136 Mazak Integrex E650H-2 x 2000mm.JPG&pic2=6136 Mazak Integrex E650H-2 x 2000mm (16).JPG&pic3=6136 Mazak Integrex E650H-2 x 2000mm (19).JPG','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.jpg&pic2=5340hyundai hit 30f (3).jpg&pic3=5340hyundai hit 30f (4).jpg','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.JPG&pic2=5323nakamuratw20mmyy (2).JPG&pic3=','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.JPG&pic2=6021combi6000 (7).JPG&pic3=6021combi6000 (3).JPG','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.jpg&pic2=5954 WFL M40G (5).jpg&pic3=5954 WFL M40G (7).jpg','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.JPG&pic2=6064 Harrison Alpha 550 (10).JPG&pic3=','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.jpg&pic2=5061moripartnerl100v (2).jpg&pic3=5061moripartnerl100v (3).jpg','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.JPG&pic2=6137 Harrison Alpha 550 (2).JPG&pic3=','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.jpg&pic2=6229 Haas TL1 (2).jpg&pic3=','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.jpg&pic2=6145 Mazak Intgrex 200IISY (2).jpg&pic3=6145 Mazak Integrex 200IISY (4).jpg','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.JPG&pic2=6151 Harrison Alpha 400 (3).JPG&pic3=6151 Harrison Alpha 400 (5).JPG','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.jpg&pic1=6146 Gildemeister MF Twin 65 (4).jpg&pic2=6146 Gildemeister MF Twin 65 (5).jpg&pic3=6146 Gildemeister MF Twin 65 (6).jpg','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.JPG&pic2=5625 Mori Seiki MT253 (2).JPG&pic3=5625 Mori Seiki MT253 (5).JPG','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.jpg&pic2=5753 Hitachi TS15 (2).jpg&pic3=5753 Hitachi TS15 (3).jpg','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.jpg&pic2=6177 CMZ TC30-1350 (2).jpg&pic3=6177 CMZ TC30-1350 (3).jpg','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
.jpg&pic2=6065 Mazak Integrex 50Y (12).jpg&pic3=6065 Mazak Integrex 50Y (8).jpg','StevenMooney','height=408,width=460,toolbar=no,scrollbars=no,resizable=no,status=no,copyhistory=no,location=no,menubar=no'))
